Home - Finishing Buffer | Sandblast Cabinet | Hydrographics Tank | Spray Booth Buffer Stewart-McDonald 36"-long arbor shaft and a small housing for increased clearance. big 14" buffs, selected especially for instrument finishing. 715-rpm buff speed is ideal for delicate instrument finishes. Driven by a powerful 3/4-horse motor. Sandblast Cabinet An enclosure used to smooth out rough surfaces. The large 33 1/2in. x 22in. x 18in. work area is combined with a 54 3/5in. height for a comfortable standing position while you blast. Hydrographics Tank Ozarks Hydrographics Galvanized tank for water transfer printing. Prepared substrates are dipped through a film with an image or pattern that is floating on top of water. 40" Advanced DIY Water Transfer Printing Tank w/ STAND. Tank Dimensions - Outside Area - 43" x 24" x 14" Dipping area - 36" x 21" x 12" Spray Booth Standard Tools 8' W x 7' H x 6'5" D open Face Booth. Air flow is pulled in through the open front, across the painter and parts being sprayed, and then exhausted through the filter bank in the back wall of the booth.